Heavy Duty Root Cutter Specifications
This specification is to describe the IEQÒ High Speed
950-2000 Series Root Cutter for use with high pressure water
sewer jet cleaners. The 950-2000 Series Root Cutter is
designed using the jet thruster and hydraulic motor as one complete
power unit, therefore not compromising hydraulic torque or R.P.M.
The motor is a simple mechanism utilizing high pressure water
supplied by a high pressure water sewer jet cleaning machine
that transfers high pressure water through thermoplastic sewer
cleaning hose to the hydraulic root cutter unit. There
are only three moving parts inside the hydraulic root cutter
motor: a commutator valve, a drive shaft and the gyroter
The 950-2000 Series Root Cutter assembly comes with 4",
6", 8" and 10" skid assemblies for adjusting to
different pipe sizes. Other size skids and configurations
for the 950-2000 Series Root Cutter are also available.
The 950-2000 Series Root Cutter assembly is furnished with a
removable saw hub so that only the saw blade portion needs to
be removed when replacing blades.
The saw blades used on the IEQÒ High Speed 950-2000 Series Root Cutter have teeth
on both the front and back of the saw blade for root cutting
in either a forward or reverse position. The heavy duty
blade is .156 (5/32") thick. Saw blades of 4",
6", 8" and 10" are supplied in the standard kit,
with larger sizes also available. The kit is furnished
with a tool box which contains an allen wrench, root cutter assembly
and replaceable skids.
The 950-2000 Series Root Cutter is designed for ½",
¾", 1" and 1 1/4" sewer hose applications.
Units are calibrated at the factory for proper G.P.M. and P.S.I.